Ragger Equipment For Recycling Waste Paper
Ragger machine is usually used with D type hydrapulper, when the D type hydrapulper operates the impurities in waste paper, like iron wire, string, plastic, cotton yarn, etc, can constantly rotate and twine, become a rope and be pull out, thus the slurry will be preliminary refined. Moreover, ragger equipment has the advantages of high work efficient, low power consumption, simple construction, convenient to operate and maintain.
Ragger Equipment Structure
Ragger is composed with chassis, rotor, reducer, transmission chain, up press roll plus landing gear, reel, change gear, guiding roll,etc.
Pulp Machine Ragger Maintenance
1.Periodically lubricate equipment every three month oil lubricating grease once;clean , check and change oil once every year.
2.Keep lifting appliance lubricant, clean it once a year, keep the movement flexible.
3.Every two years totally clean and check once.
4.Exchange Rolling Bearing: First, adjust hand wheel to raise bracket and fixate it; Second, removal the bolts on the reel’s two bearing pedestals, use lifting appliance discharge the reel. Third, discharge chain wheel, exchange the two bearings. Fourth, equip it in an reverse order.
We are professional pulp and paper machinery manufacturer, if you have any demand with paper making equipment or any question on paper business, welcome to consult. Email address: firstname.lastname@example.org.